Clear Cascade. 16 oz. jar.

General Use

Apply 1-2 coats with a brush or sponge, under or over another glaze. You can influence the direction of the flow or create a pattern by how you apply the glazes. Allow to dry thoroughly. Fire to cones 06/05. To prevent the glaze from running off your vertical pieces do not apply Pottery Cascades to the bottom third of the piece.

Helpful Hints

• Avoid applying Pottery Cascade on lower third of piece as glaze will move.
• PC601 Clear Cascade is the most fluid of the Cascade products, requiring care in application.
• PC602 White Cascade moves the least.
• Pottery Cascades are luster compatible.

Application Recommendations

• Shake for 5-6 seconds before use.
• Dispense glaze onto a palette (tile, plate, etc.) and apply with brush or decorating accessory of choice (sponge, stamp, etc.).
• Avoid dipping brush directly into jar to avoid contamination, particularly if you are using one brush to layer Pottery Cascades over other glazes. 
• Avoid applying Pottery Cascade to the lowest third of your piece as these glazes WILL move. Vertical pieces require more attention to this detail than horizontal pieces.
• Pottery Cascade glazes were designed to mature at a shelf cone 06 (999° C). Make sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (250°F per hour).