Manganese Wash. 4 oz jar.

General Use

Stoneware washes can be used alone or in combination with other glazes. As they are highly concentrated, we recommend you thin with water prior to use. They can be applied to earthenware clay bodies and low fired as well as to stoneware bodies for higher temperature firing. Test prior to use is recommended. For more information on Washes, read Mayco's Studio Guide on Washes.

Application Recommendations

• Shake for 5-6 seconds before use. Stir well.
• Dispense amount needed into a separate container and thin with water. Dispensing the glaze onto a palette (tile, plate, etc.) - helps prevent against contamination of the contents in the jar.
• For all-over coverage: brush on 1 to 2 coats; allow to dry in-between each coat.
• Washes are concentrated — adding water is recommended. Mix only the amount you plan to use in one session.
• Can be fired from cone 06 to cone 9/10. Washes can be applied to greenware and bisque.
• The choice of clay body, thickness of glaze application, firing process and temperature will affect the fired results. Always test in your kiln, on your clay body.