Haunted candle lighting kit for Clay Magic mold 3463, 3464, 3465, 3466, and 3468 (base molds 3395, 3396, 3397, and 3398).  This kit includes everything you need:

• Large flicker flame bulb
• Pink blinking bulb
• 8' cord without switch
• 4.5" pigtail
• 12" rubber stopper socket pigtail
• Wire connectors
• Glitter sheet
• Assembly instructions

This kit saves you 15% over buying the items individually!

Assembly Instructions

1. Thread the 8' cord into the back of the base and up through the side cord inlet hole.
2. Place the pink blinker bulb in the clip cord pigtail (black socket) and insert into the blinker bulb hole in the center of the base from the bottom. Thread the leads through the side cord inlet hole that the 8' cord is in.
3. From inside the candle, press the rubber stopper pigtail socket (with 12" lead) into the top hole.
4. Using a wire nut, twist together one (1) lead each from the clip cord (blinker bulb) pigtail, rubber stopper cord pigtail, and 8' cord (which one of the two leads used on the cord does not matter). Repeat with remaining wire nut and leads.
5. Very gently lie candle on its side with the window face down. Glue the glitter sheet inside the window area.
6. Place the large flicker flame bulb into the top rubber stopper socket and you're ready to light up!