Large candle lighting kit for Clay Magic mold 3392 Large Candle with House Scene.  This kit includes everything you need:

• Large flicker flame
• Two (2) 4 watt clear bulbs
• Candelabra socket
• Two (2) 4.5" pigtails
• 8' cord without switch
• Wire connectors
• All-thread pipe
• Connecting hardware

Assembly Instructions

1. Thread one hex nut onto each end of threaded pipe about 1" from each end.
2. Thread candelabra socket onto end of pipe about four full turns.
3. Thread hex nut near candelabra socket back toward end of pipe and tighten up against candelabra socket.
4. Attach opposite end of pipe to the middle hole of the candle base with the third hex nut, sandwiching ceramic between two washers.
5. Insert brown wires from the bottom toward the candelabra socket, pulling a single wire out of each side of the candelabra socket.
6. Bend the bare copper wire ends into a 'U' shape and tighten screws on candelabra socket.
7. Cover candelabra socket with cardboard sleeve.
8. Insert pigtail sockets into the two remaining holes in the candle base.
9. Insert power cord in small hole on side of candle base.

Wiring Instructions

1. Twist together one lead wire from each pigtail, one lead from the power cord and one lead from the candelabra socket in a clockwise direction, and twist on a wire nut.
2. Repeat step onewith remaining four leads.