Tailgate Camper Dish & Mug

This Project Uses

• Camper Mug bisque (MAYCO MB1541) Out Of Stock
• Camper Dish bisque (MAYCO MB1542)
• Tuxedo (MAYCO SC015-002)
• Green Thumb (MAYCO SC026-002)
• Gray Hare (MAYCO SC035-002)
• Camel Back (MAYCO SC048-002)
• Silver Lining (MAYCO SC060-002)
• Hot Tamale (MAYCO SC074-002)
• Speckled Tuxedo (MAYCO SP215-002)
• Speckled Silver Lining (MAYCO SP260-002)
• Speckled Hot Tamale (MAYCO SP274-002) Out Of Stock
• Clear One Brushing (4 oz.) (MAYCO NT-BR-004) Discontinued
• Silkscreen Medium (MAYCO AC310-004)
• Llama Drama Designer Silkscreen (MAYCO DSS0156) Discontinued
• Script Liner Brush - Size 6 (MAYCO RB106)
• Detail Liner Brush - Size 10/0 (MAYCO RB110)
• Potter's Sponge - Synthetic (CLSP001)

Directions

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
2. Using the Script Liner with SP-274 Speckled Hot Tamale, apply 3 coats to the top half of the camper. Allow glaze to dry between coats.
3. Using the Script Liner with SP-260 Speckled Silver Lining, apply 3 coats to the lower half of the camper. Allow glaze to dry between coats.
   
4. Using MC-001 6mm Low Track Masking Tape, apply to the door to look like laces on a football.
   
5. Using the Script Liner with SC-48 Camel Back, apply 3 coats to the door. Allow glaze to dry between coats. Remove the tape before the last coat has dried.
   
6. Using the Script Liner with SC-60 Silver Lining apply 1 coat to the windows. After the first coat is dry, apply another coat and shade with SC-35 Gray Hare.
   
7. Using the Script Liner with SC-35 Gray Hair, apply 3 coats to the fenders and hubcaps. Allow glaze to dry between coats.
   
8. Using the Script Liner with SP-215 Speckled Tuxedo, apply 2 coats to the tires. Allow glaze to dry between coats.
   
9. Squeeze around 2 tbs of SC-15 Tuxedo onto the palette. Add a pinch of AC-310 Silkscreen Medium and mix with a palette knife until it becomes the consistency of peanut butter. You might need to add more silkscreen medium or glaze.
   
10. Locate the banner on the DSS-0156 Llama Drama screen. Use a permanent marker to make an outline around the banner. Use the scissors to cut it out. Make sure to leave extra screen around the edges.
    
11. Take the banner and place it over the window. Hold it in place while you take a small amount of premixed silkscreen medium and gently rub in circles over the screen. Carefully lift the screen to avoid smearing.
    
12. Using the Detail Liner with SC-26 Green Thumb, apple 2 coats to the banner. Allow glaze to dry between coats.
    
13. Using the Detail Liner with SC-15 Tuxedo, outline the details on the camper. Write “TEAM!” on the banner and “#1” in the window.
    
14. For the mug, apply 3 coats of SC-74 Hot Tamale to the inside using the Soft Fan. Allow glaze to dry between coats.
    
15. Using the Soft Fan with SC-15 Tuxedo, apply 2 coats to the back of the dish and the bottom of the mug. Allow glaze to dry between coats.
    
16. Using the Script Liner with S-2101 Clear Brushing Glaze, apply 2 coats over the laces. Allow glaze to dry between coats. Or dip into NT-CLR Clear Dipping Glaze.
    
17. Fire to cone 06.